Volkswagen Key Programming Tips
Volkswagen offers a practical way to add a spare key or replace one that was not working. The process is easy and inexpensive with a few tips.
First, obtain the correct key fob. It must have a key blade that flips out or be internally fixed in the key fob. Take all the documents needed to prove ownership. Then, visit the dealership or a third-party locksmith.
Immobilizer
The immobilizer is a device used to prevent keys that are damaged or unauthorized from being able to start the vehicle. The system recognizes a unique chip on each key. A VW dealer or automotive locksmith can program additional keys, however the process requires special tools and software. Using the right tools will provide the smoothest programming experience. Before starting the key programming process technicians must replicate the issue to identify the problem. They should also search the vehicle for fault codes, check for technical service bulletins (TSBs) and test the battery inside the key fob.
A Volkswagen key that has an unprogrammed immobilizer chip can shut off the engine after a few seconds of cranking. The immobilizer chip doesn't prevent the alarm from turning on or allowing doors to be opened. The immobilizer for the key fob is a separate part that is glued to the metal flip of the car keys. It needs to be programed into the computer in the vehicle in order to work.
It is more expensive to add a new VW key than to create a duplicate when all of the originals were lost. The key must be bought from the manufacturer, then it is subject to a special programing process to be synchronized with the computer in the car. This can be done by a professional using a program such as VagTacho and VCDS. This procedure is recommended for vehicles that have the older Immobilizer 2 system and earlier.
Electronic Ignition
The electronic ignition feature of a key is an important component of the anti-theft system in vehicles. The feature is activated when the key fob is put in the ignition. However, it is not 100% reliable. It can be prone to failure, which could cause your Volkswagen's engine not working. This could be due to a number of reasons, such as faulty key programming or a damaged car battery.
This issue can be avoided when you have your Volkswagen car key fobs programmed professionally. This can be accomplished by a dealer or locksmith. Prices for this service vary from one to the next, but typically range between $90 and $150. In addition, the cost depends on the year and model of the vehicle.
To program a new VW key fob, you will need the key that is the primary working key. The new key should also be able to start the engine of your vehicle. This will allow the onboard diagnostics to recognize it as an authorized key. The immobilizer light will be turned off.
Some models require a threefour-digit PIN to enable key programming onboard. Certain models might require a scanner tool. A locksmith or dealer could utilize a scanner that is specifically designed to program keys onboard. These tools aren't in the general automotive stores, and you will need to either purchase one or borrow it from a dealership.
Keyless Entry
If you have lost your Volkswagen key fob or has a battery issue the car might start but it will not unlock. This issue is simple to fix. The first step is to ensure that the key fob is within the range of the vehicle. If it is you are, press and hold the lock button until the light on the key flash for six seconds.
This will reset the proximity of the key fob to your VW. After that you are able to unlock the vehicle by pressing the unlock button on the key fob once more. If the vehicle isn't unlocking following this procedure, you'll need to contact the dealer to have the key programmed.
The cost of programming a new Volkswagen Key can be high. spare key volkswagen G28CarKeys is crucial to request estimates from several dealers prior to making a decision on the best choice for you. Be sure to check if the dealer charges for key programming, as well as for the new key itself.
A second Volkswagen key is a great idea for a variety of reasons. You may need a backup in case of theft or you may lose your primary key. If you have a spare key that you would like to program it so that it will work with your Volkswagen, here are some simple steps to follow.
Remote Start
Volkswagen's remote-start systems are different from the previous generation of key fobs that communicated using radio waves. Instead, they connect to your vehicle via a secure wireless connection using cell technology. VW Atlas, Jetta or Passat will know when you are in range to activate features like push-button entry or keyless start. It's as simple as opening the app and connecting your smartphone to your vehicle, and then pressing the button.
Before you try this ensure that your Volkswagen is parked and that the driver's door is shut. This will ensure that only the correct key is used to access your vehicle's features. If the key is not recognized the dashboard will display an error message. This method is only compatible with the latest VW models that are equipped with an RFID sensor ring mounted on the steering wheel. These models require that a secret pin is programmed.
Close the door to the driver's side and remove the key that is used to program the new keyfob. Press the lock button of the new keyfob. This will notify the vehicle that it is a working key. The key will then start to transmit signals that will allow you to unlock the door of the driver, and then remotely start your vehicle. Some have reported that this only works when there is clear sight to the car, however others have succeeded even in parking lots that are congested.